Dodge Durango 4x4 V8 5.2 Engine Install Finished

well after almost 2 weeks of working in my spare time i finally got it all done, the oil pump had failed in the new engine i got from the wreaking yard but no damage was done to the engine tho. here are some videos

Signs of a Failed Freeze Plug

this is a 1998 Dodge Durango 5.2 magnum engine. the freeze plug was failing for sometime, it had a slow leak at 1st but i could never spot it. until last may when i started my durango up n smelt heavy anti freeze. i looked underneath the durango n spotted it coming out of the bell housing on the transmission. and this is what i found. if you start to notice that your car or truck or van is losing coolant overtime , if you notices wetness around the block, if you can smell anti freeze while the engine is running, if you notice there is a small spot of antifreeze underneath your car or truck or van its best to check it out.

Dodge Durango Oil Pan Change From 4x2 to 4x4

just alittle FYI you have to change the oil pick up tube and the Oil pan if you have a 4x2 engine going into to 4x4 durango. check out the video

Dodge Durango V8 clutch fan removal

Dodge Durango 5.2 V8 Engine Removal Progress

this is just a little update. one thing i can say that on the 4x4 they have the engine mounts that attach to the front diff.

Predator Engine 6.5Hp Harbor Freight engine

Predator Engine 6.5Hp harbor Freight engine. recently purchased this engine at harbor freight for 132.00 out the door didn't seem like a bad deal. i have gone thru the break in process as they state. 3 hours no faster then 1/3 throttle i have also disconnected the oil pressure kill switch because this engine is on my kids go kart which they found out really quick that it shuts off once they take a hard corner. this engine starts on the 1st pull with the choke on. runs really well for being a Honda GX 200 clone. ill post more videos n a review after my kids have had it for a while n we will see how it stands up.

Briggs & Stratton Flat Head 5Hp Powered Go kart

i recently picked this engine up from a friend i knew it ran ok but i didnt expect to have so many problems with it at this time it will run but it cuts out i thought i had the problem fixed. i recently found that the pulsa jet carburetor was the problem i have ordered a rebuild kit for that engine. here are some videos of what i have done so far.