Translate

Thursday, November 14, 2019

Project Honda Civic Ute aka EF'D Ute

Recently acquired Honda Civic EF it wasn't worth saving so we decided to turn it into a truck and here is our video


Wednesday, October 23, 2019

Gambler 500 Mr Mom Build

This is my Gambler 500 build I purchased a 1993 Plymouth Voyager 3.3 V6 AWD from my neighbor, the van had been sitting for about 2yrs. When we got it to my house I had it running in under 10mins, the fuel pump relay had failed so I swapped the fuel pump relay with the cooling fan and took it for a drive, the transmission was stuck in limp mode. I replaced the solenoid pack on the transmission n I was ready to start my build. Why would someone take a perfectly well preserved family vehicle off-road I was asked I said "I've always wanted a mini van with AT tires and loud exhaust, cool led headlights and rear mounted Jerry cans. I started my build with a plan from day one. Below are my videos through out the build.


2019 Sasquatch Run

This was an all around great weekend. Al of trash picked up, spent time with old and new friends. Becoming part of the gambler 500 group has become one of the best experiences in my life, I always drove interesting vehicles off-road my whole life. Everyone who is apart of the gambler 500 is my brother and sister we are all family and we help each other out no one is left behind. Below are my videos I took on this adventure.



Tuesday, November 27, 2018

2000 Pontiac Grand Prix GTP Rebuild

hey guys and gals i recently started working on my GTP, i purchased the car back in January 2018, the previous owner had the transmission rebuilt just before i purchased the car. unbeknown to me the intake gaskets started to leak on the way home. i didnt notice the leak until it was too late, coolant had mixed with the oil we all know what that means ill just say milk shake anyone..lol so i proceeded to replace the intake gaskets and supercharger gasket. i changed the oil 3 times it was clean at that point n i thought i would have no issues after that. well i was wrong one night in june i ended up spinning a connecting rod bearing.  so it sat for months until i acquired the replacement engine. i ended up purchasing a donor gtp off of offer up. here is why i call it a saga watch the videos to see what i have been threw trying to get this car back on the road.





Tuesday, July 3, 2018

1999 Hyundai Elantra Gambler 500 Update

well here we go its almost done we have a few small things to finish up. here is our progress.

2in lift completed
Straight Pipe Exhaust
Gauges installed

tags
Hyundai Elantra 2in lift
Lifted Elantra

Tuesday, March 20, 2018

Dodge Neon 2.0 SOHC P0340 Fix

i recently worked on a 2005 Dodge Neon 2.0 Sohc. the car had come from an tow auction that my friend devin had purchased it was a non running car at that time no key. so after getting a key made for the car it started right up without a problem. we had noticed that someone had installed a new clutch. they had also replaced the starter, they also had installed a new timing belt.  the car would run for about 2 minutes then the check engine light would come on. the only code was P0340 Camshaft intermittent signal. i replaced the Camshaft sensor and it didnt fix the problem. i proceed to check wiring from the ecu to all of the engine sensors there was a problem i also replaced the cam magnet n that did not fix the problem i tired all the fixes that are present thru the forums for neon's n pt cruisers and stratus's. i decided to check mechanical timing. i rented a Harmonic balancer puller, pulled the harmonic balancer off. removed the engine mount plate aka front plate. removed the 2 bolts at the bottom of the timing belt cover. removing the timing belt cover i noticed something was wrong, i have worked on a lot of these 2.0 sohc engines. i hand cranked the engine to TDC on the crank shaft n thats when i noticed the camshaft sprocket was 2 teeth advanced. loosened the timing belt tension-er.  after retiming the engine, i put the harmonic balancer back on and started the engine. after about 2 minutes i decided to check for codes with my scanner. the P0340 code was finally gone no more random bogging or stalling past 2300 Rpm. so if you have recently performed a timing belt replacement and this code comes up almost instantly recheck your timing marks to confirm nothing moved.


Gambler 500 Build 1998 Hyundai Elantra

this is our Gambler 500 build its a 1998 Hyundai Elantra, it was purchased from a tow auction back in October of 2017. it was in an accident back in December 2017. my friend showed me a video of the gambler 500 rally. we both thought what the hell run the car in the gambler it still runs n drives just fine, we started working on it a few days ago. my friend had purchased a new radiator from eBay, i supplied the cooling fans from my other project. we did have to do an oil change due to the fact of the hood was left off of the car for 3 months so rain water had dripped down the dipstick tube slowly filling the crank case full of water or someone decided to dump water in the crank case we haven't fully figured it out. the car doesn't have a blow head gasket so we know something happened. we do have a set of 4x6 led headlights to use in place of the destroyed head light assembly's. we also have a heavy duty front bumper from a ford ranger that we will be mounting to the front bumper brackets also. i will post more videos on our progress on the Hyundai aka shit car .