Traxxas Stampede 4x4 To Traxxas Slash 4x4 Conversion

let me start off by saying that the conversion once i had all the parts was a breeze took me 45mins total. i can say it does handle alot better not as top heavy. the wider chassis of the slash does make a difference. here is what i started with.

at this point you should know how to remove the front and rear modular diffs. 4 torx screws in the front and 4 torx screws, you will need to also remove the steering linkage torx screw also, 4 torx screws in the rear and it should pop apart. removing the electronics is pretty much straight forward locate each of the torx screws holding each part down n make sure that you keep those screws also. when you have it all apart you will notice that the front diff does not have splines you will need to remove the torx screw that holds the stampede center drive shaft on the front diff.

Parts List
1x Slash 4x4 chassis $20.00
1x Slash Body mount kit for the front only
1x body mount lift kit (longer screws)
1x Slash 4x4 Center Drive line
1x Slash front diff out put gear (part number 6888x)
1x Slash Body

Finished Product below i ended up cutting the slash's body for clearance. i plan to purchase another body also.