Tuesday, December 30, 2014
1990 Nissan 240SX Project Drift car Update
recently made rear quarter panel flares made from scratch.
1976 C-10 Truck Headlight Upgrade
recently installed after market headlights. they use the H4 blub, the stock headlights were very dim, after installing the new ones. the light output is better then the older ones.
Sunday, December 21, 2014
2001 Dodge Caravan How to replace a alternator and power steering pump
here are some vids i took of my time working on a 2001 dodge caravan, i can say that when you work on the power steering pump its a very tight space to work in. also a quick tip make sure that you loosen the Power steering Hard Line 1st and make sure you Push Down to loosen and pull up to tighten you cannot get a good grip from the bottom also. make sure you have a pulley puller also. the size you will need is a 3/8ths ratchet and a 13mm socket for the 5 total blots that hold the pump to the engine, you will need either a 5/8ths line wrench or 16mm to 17mm line wrench.
Thursday, December 18, 2014
1990 Nissan 240sx SR20DET Turbo making Rear Quater Panel Flares
a friend of ours wanted fender flares on his 240sx. so he asked if we could make them for him. as of most drift cars use fiber glass wide body kit. as we started cutting away the fender well and rolled the inner wheel well back to the body the idea presented itself we have about 4 fenders that came were for the car. this is what we came up with. there are not that many 240sx's out there with home made flares that look good but here is our progress.
Sunday, December 14, 2014
1994 Honda Accord New Exhaust Installed
my brother in law purchased this car for cheap it needs work but at least mechanically it is in great condition.
Monday, December 1, 2014
Subscribe to:
Posts (Atom)