Vats Pass bypass 1989 Chevrolet Corvette

my friend recently bought this corvette, he didnt get the key with it. i ended up making all 15 key values for the vats pass security system, i 1st verified that the system was working, we did have to pull the cylinder lock for the ignition out of the steering column, once i had the 2 white wires off of the cylinder lock, i began hooking up resistors one right after another 1st i waited the 4mins exactly with that didn't work went thru all 15. i tested the voltage coming from the vats module it was fine. so i waited 6 minutes this time, to my frustration and amazement it was the 8th value i tired. the car hasnt been running in over 2 yrs. we put fresh gas n a new battery checked all the fluids before we even started it. we did find that it has a cold start issue also. it does need a full tune up n service on the transmission n engine oil n coolant. towards the end of the day we decided to drive the car home after making sure the brakes worked and it didnt overheat n the transmission was shifting correctly. here is a video i took of it running on the 1st fire up.n i used 1/2 watt resistors also from radio shack. here are the key values. the key value was 2370 ohms which i had the resistor value at 2330 ohms.

KEY CODE : OHMS
1- 402 ohms
2- 523 ohms
3- 681 ohms
4- 887 ohms
5- 1,130 ohms
6- 1,470 ohms
7- 1870 ohms
8- 2,370 ohms
9- 3,010 ohms
10- 3,740 ohms
11- 4,750 ohms
12- 6,040 ohms
13- 7,500 ohms
14- 9,530 ohms
15- 11,800 ohms

Chevrolet C20 4X4 SBC 350 V8 Running Again